Digima D-1520 1.5 kW open-type fibre laser, 1500x2000
D-1520 is a Fiber Laser D-1520 1500W designed for CNC cutting of sheet metal and metal components. The machine combines a compact design, a 1500 × 2000 mm working area, a Raycus 1500W laser source and a Raytools BS03KCAT cutting head.
This model is ideal for sheet-metal component production, metalworking workshops, advertising companies, and the production of guards, panels, enclosures, technical components, and parts made of carbon steel, stainless steel, aluminium, brass and copper.
Two main photos of the D-1520 laser
15 key machine components
Optional components available for purchase
The following components can be added to the laser configuration.
Helps maintain stable power supply and smooth machine operation, especially in locations with voltage fluctuations.
A solution for economical cutting of carbon and stainless steel using compressed air.
A simple and practical system for removing dust and fumes generated during laser cutting.
Optional laser consumables
Consumable parts included in the set.
Machine dimensions and technical drawing
Cutting parameters for the D-1520 1000 W model
Carbon steel — CS
Cutting parameters for a 1000 W source.
| Material thickness | 1000 W cutting speed | Material |
|---|---|---|
| 1 mm | 15 m/min | Carbon steel |
| 2 mm | 6 m/min | Carbon steel |
| 3 mm | 2,5–3,2 m/min | Carbon steel |
| 4 mm | 2,3–2,8 m/min | Carbon steel |
| 5 mm | 1,8–2,1 m/min | Carbon steel |
| 6 mm | 1,2–1,5 m/min | Carbon steel |
| 8 mm | 1–1,1 m/min | Carbon steel |
| 10 mm | 0,6–0,9 m/min | Carbon steel |
Stainless steel — SS
Cutting parameters for a 1000 W source.
| Material thickness | 1000 W cutting speed | Material |
|---|---|---|
| 1 mm | 15–20 m/min | Stainless steel |
| 2 mm | 4–6 m/min | Stainless steel |
| 3 mm | 2,5–3 m/min | Stainless steel |
| 4 mm | 1–1,5 m/min | Stainless steel |
Aluminium — AL
Cutting parameters for a 1000 W source.
| Material thickness | 1000 W cutting speed | Material |
|---|---|---|
| 1 mm | 10–15 m/min | Aluminium |
| 2 mm | 4–6 m/min | Aluminium |
| 3 mm | 1–1,5 m/min | Aluminium |
Brass — Brass
Cutting parameters for a 1000 W source.
| Material thickness | 1000 W cutting speed | Material |
|---|---|---|
| 1 mm | 8–10 m/min | Brass |
| 2 mm | 2–2,6 m/min | Brass |
| 3 mm | 0,6–1 m/min | Brass |
Operating cost analysis — 1000 W variant
Data manually transcribed from the operating cost analysis table for 1000 W power.
| Item | Air / stainless steel | Oxygen O₂ / stainless steel | Nitrogen N₂ / stainless steel |
|---|---|---|---|
| Laser power | 2,3 kW | 2,3 kW | 2,3 kW |
| Water chiller unit | 2,8 kW | 2,8 kW | 2,8 kW |
| Main machine | 5,4 kW | 5,4 kW | 5,4 kW |
| Extraction unit | 3 kW | 3 kW | 3 kW |
| Total power | 13,4 kW | 13,4 kW | 13,4 kW |
| Average energy consumption | 13,4 × 80% = 10,72 kW | 13,4 × 80% = 10,72 kW | 13,4 × 80% = 10,72 kW |
| Gas consumption | 150 l/h | 30 l/h | 150 l/h |
D-1520 1000 W specification
| Parameter | Value |
|---|---|
| Model | Fiber Laser D-1520 1500W |
| Working area | 1500 × 2000 mm |
| Laser power | 1000 W |
| Cutting head | BS03KCAT |
| Laser source | Raycus |
| Fiber source service life | Over 10,000 hours |
| Chiller | S&A / Hanli |
| Cutting thickness range | 0.5–10 mm within the standard precision range |
| Cutting assist gas | Standardly without an air source; optionally a screw compressor with air tank, oxygen or nitrogen |
| Maximum acceleration | 1,5G |
| Repositioning accuracy | Within ±0.01 mm |
| Lubrication system | Electric |
| Dust extraction | Standardly without an extraction unit; optionally an extraction fan |
| Positioning accuracy | < ±0,02 mm |
| Assist gases | Oxygen, nitrogen, compressed air |
| Repeatability | ≤ ±0,005 mm |
| Maximum speed | 60 m/min |
| Supported file formats | DXF / PLT / AI / LXD / GBX / NC code |
| Power supply voltage | 380 V, 3 phases, 50/60 Hz / 220 V |
| Warranty | 1 year |