88° 95T/M 20.174 die
V Die 20.174
Die 20.174 is a compact bottom tool for press brakes, designed for precise sheet-metal bending using a V-type working groove. The low 30 mm profile allows the tool to be used in configurations requiring limited working height.
The working groove has an angle of 88° and an opening of V = 10 mm. The die has a lower-section width of 14 mm, an overall base width of 17 mm and a maximum permissible load of 95 t/m.
Model 20.174 provides stable material support during bending and is intended for applications requiring a compact tool with high load capacity per metre of working length.
Key Features of Die 20.174
A V-type bottom die is one of the basic components of press-brake tooling. Proper selection of V opening, working angle, profile height and load capacity affects bending quality, safety and production repeatability.
V Bottom Die
Bottom tool for a press brake with a V-type working groove.
V10 Opening
The 10 mm wide working groove provides stable support for correctly selected sheet metal.
88° Angle
The 88° V geometry enables repeatable, precise bends.
95 t/m Load Capacity
The maximum permissible tool load is 95 tonnes per metre of length.
Low 30 mm Height
The compact height allows operation in systems requiring a low tool.
Rounded Corners
The upper corners are marked with radius R, without a specified radius value.
Technical Specification of Die 20.174
| Parameter | Value |
|---|---|
| Tool Type | V bottom die / bottom tool for press brake |
| Profile Designation | 20.174 |
| Maximum Load | 95 t/m |
| Working Groove Angle | 88° |
| V-Groove Opening | 10 mm |
| Overall Height | 30 mm |
| Lower Section Width | 14 mm |
| Overall Base Width | 17 mm |
| Upper Corner Radius | R — value not specified in the drawing |