88° 95T/M 20.173 die
V Die 20.173
Die 20.173 is a compact bottom tool for a press brake, designed for precise sheet-metal bending using a V-type working groove. Thanks to its height of only 30 mm, this model works well in configurations requiring a low-profile tool.
The working groove has an angle of 88° and an opening of V = 8 mm. The die base width is 14 mm, and the maximum permissible load is 95 tonnes per metre. The upper profile edges are rounded, while the R radius value is not specified in the drawing.
Model 20.173 provides stable material support during bending and is intended for applications requiring compact tool height and high load capacity per metre of working length.
Key Features of Die 20.173
A V-type bottom die is an important component of press-brake tooling. Proper matching of the V opening, working angle, profile height and load capacity affects process stability, edge quality and repeatability of produced parts.
V Bottom Die
Bottom tool for a press brake with a precisely made V-type working groove.
V8 Opening
An 8 mm wide working groove for precise support of properly selected materials.
88° Angle
The 88° V geometry enables repeatable bends with consistent geometry.
95 t/m Load Capacity
The maximum permissible tool load is 95 tonnes per metre of length.
Low 30 mm Height
The compact 30 mm high profile works well in systems requiring a low tool.
Rounded Corners
The upper corners are marked with radius R, whose value is not specified in the drawing.
Technical Specification of Die 20.173
| Parameter | Value |
|---|---|
| Tool Type | V bottom die / bottom tool for press brake |
| Profile Designation | 20.173 |
| Maximum Load | 95 t/m |
| Working Groove Angle | 88° |
| V-Groove Opening | 8 mm |
| Overall Height | 30 mm |
| Base Width | 14 mm |
| Upper Corner Radius | R — value not specified in the drawing |