35° 70T/M die 20.171
V Die 20.171
Die 20.171 is a bottom tool for press brakes, designed for precise sheet-metal bending using a V-type working groove. Thanks to its 35° geometry, the tool enables repeatable bends requiring a narrower working angle than classic 60° or 90° dies.
The model has a groove opening of V = 16 mm, an overall height of 90 mm and a maximum load capacity of 70 tonnes per metre. The width of the lower mounting section is 14 mm, while the overall base width is 30 mm.
Model 20.171 is suitable for press brakes wherever stable material support and precise reproduction of bend geometry using a narrower working angle are required.
Key Features of Die 20.171
A V-type bottom die is one of the basic components of press-brake tooling. Proper matching of groove width, groove angle and permissible load directly affects the quality, stability and safety of the bending process.
V Bottom Die
Bottom tool for a press brake with a V-type working groove.
V16 Opening
The 16 mm wide working groove provides proper sheet support during bending.
35° Angle
Special groove geometry for precise and more closed bends.
70 t/m Load Capacity
The maximum permissible tool load is 70 tonnes per metre of length.
90 mm Height
The overall die height is 90 mm according to the attached technical drawing.
14 / 30 mm Base
The lower mounting section is 14 mm wide, and the overall base width is 30 mm.
Technical Specification of Die 20.171
| Parameter | Value |
|---|---|
| Tool Type | V bottom die / bottom tool for press brake |
| Profile Designation | 20.171 |
| Maximum Load | 70 t/m |
| Working Groove Angle | 35° |
| V-Groove Opening | 16 mm |
| Overall Height | 90 mm |
| Lower Section Width | 14 mm |
| Overall Base Width | 30 mm |